Filter
Top Products
Appendix (continued)
4. Use the arrow-down key to select LPT Mode.
5. Select the parallel port mode with the highest performance (e.g. ECP).
6. Follow the legend directions to save the setting and exit Setup.
Steps for the Millennium, Phoenix BIOS v 4.05
NOTE: The steps for this computer are not included in the document received in
the box.
1. While the computer is booting, follow the directions on the screen: Press F2 to
enter Setup.
2. Go to Connectivity.
3. Change Port from AT to ECP.
4. Select PS/2.
Packard Bell
General Steps
1 While the computer is booting, follow the directions on the screen: Press F2 to
Enter Setup. (It might be F1 on some models.)
2. Select Advanced from the menu bar.
3. Follow the legend directions to select Integrated Peripherals (or Peripheral
Configuration on some models).
4. Choose the parallel port mode with the highest performance (e.g. ECP).
5. Follow the legend directions to save the setting and exit Setup.
Steps for the Force 443 CD, AMBIOS BIOS v 1.00.12.1313oe
1 While the computer is booting, follow the directions on the screen: Press F1 to
Enter Setup.
2. Select Advanced from the menu bar.
3. Use the down-arrow key to select Peripheral Config and then
press ENTER.
4. Use the down-arrow key to select Parallel Port Mode and then
press ENTER.
5. Use the down-arrow key to select Extended (originally Compatible) and then
press ENTER.
6. Press F10 to save the setting.
Sony
Models PCV-70/90/100/120:
1. Restart your computer.
2. During the first black and white Sony screen, press F3 to enter the
boot screen.
3. Press F1 to enter the BIOS Setup.
4. Use right arrow to reach the Advanced menu.
32
P73043/F1U127uKIT univ/man.qxd 4/28/00 1:58 PM Page 32