Filter
Top Products
BENQ Corporation
-4-
Back panel of the Access Point:
Back Panel Description
Reset button
Designed to reset the AWL500 after a system failure or crash.
When pressed, the AWL500 will reset.
PWR/DC jack
Where power is input to AWL500 through the power adapter
supplied with it. Please do not plug other power adapters into
this jack.
LAN port
Where the AWL500 can be connected to ADSL/cable
modem/Ethernet LAN via an RJ-45 cable.
Antenna
Where the radio signal carrying network data is transmitted and
received.
Powe
r
Socket
The power adapter plugs into the socket labeled “POWER”.
10/100Mbps Ethernet Ports
The Wireless LAN Access Point supports auto-detect, 10/100M MDI
Ethernet port. To connect the Access Point to a hub, use a straight-through
UTP cable; to connect the Access Point to a computer/station, use a
crossover UTP cable.
NOTE