Filter
Top Products
Chapter 3 Configuration - 8
Chapter 3 Configuration
This chapter describes the web-based ESG-103 configuration in detail. The
ESG-103 broadband sharing router has a structured menu and a "Quick
Installation Wizard" page to help user quickly set up their ESG-103. This
chapter explains each of these menu sections. When the ESG-103 boots up
at the first time, it has a default IP address “
192.168.1.1
” assigned to its
LAN interface. In order to configure ESG-103, please point an Internet
browser from the browsing host to
http://192.168.1.1
and you will be pre-
sented with the log in screen as shown below. You must log in with the cor-
rect user name and password to start the ESG-103 configuration in a MD5
authenticated web session. For setting up this MD5 authenticated session,
the default user name is
“admin”
, and the default password is also
“admin”
. We strongly recommend that - you should change the root pass-
word as described in the
Admin Password
section.
Once your log-in is successful, you will be presented with a welcome web
page. In that page, you can proceed with ESG-103 configuration or link to
BenQ's web site for advanced information.