Filter
Top Products
Chapter 2 Hardware Installation - 4
Chapter 2 Hardware Installation
This chapter will describe how to set up ESG-103 step by step. After you've
set up your ESG-103 well, then you may need to configure your
WAN
setting to match the mode that you've applied for from your
ISP
or
NSP
.
2.1 Back Panel
2.2 Check the components you need
To set up your ESG-103, you need some components described as below:
(1) 1 x ESG-103 Broadband Router
(2) 1 x Power Adapter
(3) 1 x CAT-5 UTP Fast Ethernet Cable
(4) 1 x ADSL/Cable Modem (
or other broadband device with Ethernet Interface
)
(5) 1 x Ethernet Network Card