Filter
Top Products
Maintenance58
5. Loosen the screw that secures the lamp. Be
careful not to lose the screw as it is needed to
hold the lamp in place. It is strongly
recommended that you use a magnetic-head
screwdriver.
6. Pull out the lamp connector from a slot in the
lamp compartment. Disconnect it from the
projector as illustrated.
7. Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
• Pulling it too quickly may cause the lamp to break
and scatter broken glass in the projector.
• Do not place the lamp in locations where water
might splash on it, children can reach it, or near
flammable materials.
• Do not insert your hands into the projector after the
lamp is removed. If you touch the optical
components inside, it could cause color
unevenness and distortion of the projected images.
8. Insert the new lamp into the lamp
compartment and make sure it fits in the
projector.
9. Reconnect the lamp connector and place it
back into its slot to be flush with the projector.
1
2
2
1
1
2