BenQ MP610 Projector User Manual


 
Operation30
Color Temp
(depends on
the selected
Application
mode)
There are four color temperature* settings are available.
1. T1: With the highest color temperature, T1 makes the image
appear the most bluish white than other settings.
2. T2: Makes images appear bluish white.
3. T3: Maintains normal colorings for white.
4. T4: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be “white” for
various purposes. One of the common methods of representing white
color is known as the “color temperature”. A white color with a low color
temperature appears to be reddish white. A white color with a high color
temperature appears to have more blue in it.
Brightness
(depends on
the selected
input source)
Adjusts the brightness of the image. The higher the value, the brighter
the image. And lower the setting, darker the image. Adjust this control
so the black areas of the image appear just as black and that detail in the
dark areas is visible.
Contrast
(depends on
the selected
input source)
Adjusts the degree of difference between dark and light in the image.
The higher the value, the greater the contrast. Use this to set the peak
white level after you have previously adjusted the Brightness setting to
suit your selected input and viewing environment.
Color
(depends on
the selected
input source)
Increases or decreases the color intensity of the image.
Tint (50)
Adjusts the color tones of the image. The higher the value, the more
greenish the image becomes. The lower the value, the more reddish the
image becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.
50
-30
+70
-30
50
+70