Filter
Top Products
Connection20
Connecting Video source devices
You need only connect the projector to a Video source device using just one of the above
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Connecting audio
The projector has one built-in mono speaker which is designed to provide basic audio
functionality accompanying data presentations for business purposes only. It is not designed
for, nor intended for stereo audio reproduction use as might be expected in home theater or
home cinema applications. Any stereo audio input (if provided), is mixed into a common
mono audio output through the projector speaker.
When you connect audio output signal from a video source device, please set the audio
output in dual track to obtain an optimal sound effects.
If you have a separate sound system, you will most likely want to connect the audio output
of your Video source device to that sound system, instead of to the mono audio projector.
The audio connections illustrated on page 18 are provided for informational purposes only.
You need not connect audio to the projector if there is an alternate sound system available,
or if audio is not required.
Te r m i na l
name
Terminal appearance Reference Picture quality
HDMI
(MP625P only)
HDMI
"Connecting an
HDMI source device
(MP625P only)" on
page 21
Best
Component Video
COMPUTER
"Connecting a
Component Video
source device" on
page 22
Better
S-Video
S-VIDEO "Connecting an S-
Video/composite
source device" on
page 23
Good
Video
VIDEO
Normal