Filter
Top Products
Operation50
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Quick
Cooling
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 41 for details.
Audio
Settings
Allows you to enter the audio setting menu.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
Lamp
Settings
Lamp mode
See "Setting Lamp mode as Economic" on page 54 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 58 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 54 for details on how
the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one.
Power on lock
See "Securing the projector" on page 28 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check that
the projected image is free from distortion.
5. SYSTEM SETUP: Advanced menu