Filter
Top Products
Introduction14
Remote control
1. ON
Turns on the projector. See "Starting up
the projector" on page 29 for details.
2. COMPUTER 1/COMPUTER 2
Displays RGB (PC)/Component video
(YPbPr/ YCbCr) signal.
3. S-VIDEO
Displays S-video signal.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See "Using
the menus" on page 33 for details.
5. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32 for
details.
6. Volume /Arrow keys ( / Left,
/ Right)
Adjusts the sound level.
When the On-Screen Display (OSD)
menu is activated, the #5, and #6 keys
are used as directional arrows to select
the desired menu items and to make
adjusents. See "Using the menus" on
page 33 for details.
7. MODE/ENTER
Selects an available picture setup
mode. See "Selecting a picture mode" on
page 39 for details.
Activates the selected On-Screen
Display (OSD) menu item. See "Using
the menus" on page 33 for details.
8. ECO BLANK
Used to hide the screen picture. See
"Hiding the image" on page 44 for
details.
9. PAGE + / -
Page up/down arrows when connected
through USB to a PC. See "Remote
paging operations" on page 44 for
details.
10. ZOOM + / -
Magnifies or reduces the projected
picture size. See "Magnifying and
searching for details" on page 37 for
details.
11. FREEZE
Freezes the projected image. See
"Freezing the image" on page 44 for
details.
12. NETWORK SETTING
Enables Network Settings OSD menu.
13. TEST
Displays the test pattern. See "Using
build-in test pattern" on page 31 for
details.
14. OFF
Turns off the projector. See "Shutting
down the projector" on page 70 for
details
9
19
5
10
24
23
1
2
3
4
6
7
8
5
11
12
13
14
15
16
17
18
6
20
21
22