Filter
Top Products
Operation
80
Operation Settings
Direct Power On
Selecting On enables the function. See "Starting up the projector" on
page 29 for details.
Signal Power On
Selecting On the projector will turn on automatically when VGA
signal is detected.
Selecting Off the projector has to be turnned
on manually (by keypad or remote).
See "Starting up the projector"
on page 29 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 87 for details.
Quick Cooling
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Instant Restart
When instant restart is on, users can restart projector immediately
within 90 secs after turning off projector.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image"
on page 44 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Fan Speed
This function is only available when a dust filter is installed. Selecting
High enables the function.
4. SYSTEM SETUP: Basic menu