Filter
Top Products
Introduction
5
User’s Manual
External Control Panel
• The Infrared Remote Receiver (Front and Rear) allows the projector to
accept signals from the remote control. For best results, be sure to aim the control
toward the sensor without any obstructions between the two, and at a distance no
greater than 6 meters.
•
Menu
will display the menu system on screen. Press
Menu
again to access the
sub-menus. Left and Right help you navigate among choices and settings in the
menus and sub-menus. However, when the on screen menu is not activated, the
Left
and
Right
buttons will function as
Keystone +/-
hot keys.
•Press the Exit button to go back to the main menu. Press Exit again to leave the
menu system.
•The Status Indicator will blink or light up when the lamp needs service, cooling
or replacement. See “Lamp Information” on page 19. for more detailed
information.
• When the projector is on,
Back-lit Power
will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
•Press
Power
for 1 second
to turn the projector on or off.
•
Auto
key: Automatically sense the best picture quality for current received signals.
• Source key: Select signal sources, PC, Video, S-video and YPbPr.
Auto Source
Power
Keystone/ Left
Menu
Exit
Keystone/ Right
Lamp status
indicator