Filter
Top Products
Maintenance
19
User’s Manual
MAINTENANCE
Lamp Information
Use and Replacement of Lamp
When the Lamp Indicator lights up red or a message displays to suggest the time of lamp
replacement, please change a new lamp or consult your dealer.An old lamp could cause
a malfunction to the projector and may explode.
LED Status Indicators
Caution
The LAMP indicator will light up if the lamp becomes too hot. Turn off the
power and let the projector cool for 45 minutes. If the LAMP indicator is still
red when turning the power on, please contact your dealer.
Lamp Replacement
Caution
To reduce the risk of electrical shock, always turn off the projector and dis-
connect the power cord before changing the lamp.
Lamp Life Indicators When this LED shows red continuously, it is warning you that
the lamp life has exceeded 1500 hours. Replace the projec-
tion lamp with a new one immediately.
CHANGE THE LAMP, AND
RESET THE LAMP TIMER
The lamp has been in operation for 1400 hours. Change a
new lamp for optimal performance.
CHANGE THE LAMP. THE
POWER WILL TURN OFF
AFTER 20 HOURS
The lamp has been in operation for 1480 hours, and the
power will turn off after 20 hours.
CHANGE THE LAMP! The lamp has been in operation for over 1500 hours. The
warning message will display for 30 seconds every 5 minutes
after you turn on the projector and the power will turn off
automatically in 10 minutes.
Lamp is not properly attached LED blinks rapidly.
Temperature is too high When the projector’s internal temperature is too hot to
operate safely, the LED blinks slowly for one minute and the
lamp turns off automatically.
If the LED light is off, the projector’s lamp and temperature
are operating under normal conditions.