Filter
Top Products
11
Introduction
18. Right/
Locks the keys on the projector. See "Locking
control keys" on page 36 for details.
When the On-Screen Display (OSD) menu is
activated, the #4, #6 and #18 keys are used as
directional arrows to select the desired menu
items and to make adjustments. See "Using the
On-Screen Display (OSD) menus" on page 23 for
details.
19. SOURCE
Displays the source selection bar. See "Switching
input signal" on page 26 for details.
20. LASER
Emits visible laser pointer light for presentation
purposes. See "Operating the LASER pointer" on
page 11 for details.
21. PAGE /
Operate your display software program (on a
connected PC) which responds to page up/down
commands (like Microsoft PowerPoint). See
"Remote paging operations" on page 34 for
details.
22. D. ZOOM (+, -)
Magnifies or reduces the projected image size. See
"Magnifying and searching for details" on page 28
for details.
Operating the LASER pointer
The LASER Pointer is a presentation aid
for professionals. It emits red colored
light when you press it and the indicator
lights up red.
The laser beam is visible. It is necessary to
press and hold LASER for continuous
output.
Do not look into the laser light
window or shine the laser light beam on
yourself or others. See the warning messages
on the back of the remote control prior to
using it.
The laser pointer is not a toy. Parents should be
mindful of the dangers of laser energy and keep this
remote control out of the reach of children.
Remote control effective range
Infra-Red (IR) remote control sensors are located on
the front and the back of the projector. The remote
control must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control
sensors to function correctly. The distance between the
remote control and the sensors should not exceed 8
meters (~ 26 feet).
Make sure that there are no obstacles between the
remote control and the IR sensors on the projector that
might obstruct the infra-red beam.
Making the remote control a wired control
The remote control is equipped with a jack on the top
allowing connection to the projector with a 2.5mm
mini jack cable available in the market. This helps you
easily locate the remote control when needed as it is
connected to the projector and within the distance no
greater than the cable’s length.
• Operating the projector from the front
A
p
p
r
o
x
.
1
5
°
A
p
p
r
o
x
.
1
5
°
• Operating the projector from the rear