Filter
Top Products
43
Operation
The INFORMATION menu shows you the current operating status of the projector.
FUNCTION
(default setting / value)
DESCRIPTION
Menu Settings
Menu Display Time (5 sec)
Sets the length of time the OSD will remain active after your last key press.
The range is from 5 to 30 seconds in 5-second increments.
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp Settings
Lamp Mode (Normal)
Setting the projector in Economic mode extends the lamp timer automatic
shutdown feature. See "Setting Lamp Mode as Economic" on page 45 for
details.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to '0'. See
"Resetting the lamp timer" on page 47 for details.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used. See "Getting to
know the lamp hour" on page 44 for details on how the total lamp hour is
calculated.
Security Settings
Change Password
You will be asked to enter the current password before changing to a new
one. See "Utilizing the password function" on page 24 for details.
Change Security Settings
Power On Lock (Off)
Splash Screen Lock (Off)
See "Utilizing the password function" on page 24 for details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Color Space Conversion, Language, Projector
Position, My Screen, High Altitude Mode, Lamp Settings,
Security Settings.
FAQ-Image and
Installation
Displays possible solutions to problems you may encounter.
FAQ-Features and
Service
Current System
Status
Source
Shows the current signal source.
Picture mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color system
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
5. SYSTEM SETUP: Advanced menu 6. INFORMATION menu