Filter
Top Products
46
Using the projector
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector
Position, High Altitude Mode, Password, Key Lock, and ISF.
ISF
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Function Description
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the Picture > Preset Mode menu.
Resolution
Shows the native resolution of the input source.
Color System
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Equivalent Lamp
Hour
Shows the total lamp time used.
3D Format
Shows the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version
Shows the firmware version of your projector.