Bernina Happy Voyager Robotics User Manual


 
Happy Voyager
Drive Mode 02
Additional Display: When the hoop is offset
manually.
Distance moved in millimeters from the start point
in the X and Y direction.
Pattern size information in millimeters.
Note: If the numbers are equal i.e.
37.4 / 37.4 and 29.2 / 29.2 the design is digitized
center/center.
X distance moved from
start point.
Y distance moved from
start point.
Size of Pattern info
Height & width
Distance between top and start point.
Distance between bottom and start point
Distance between extreme left and start point.
Distance between extreme right and start point.