Filter
Top Products
Push Button usage
There are 3 types of trigger states for the Push Button.
1. “Broadcast State”, for a 2070(P) providing information for another 2070(P) to
join its powerline network group (it works even if it is the only one currently in
the group).
2. “Join State”, for an ungrouped 2070(P) to join an existing powerline network
group.
Press the Push Button on the first 2070(P) device turns it into the “Broadcast State”
and press the Push Button on the second ungrouped 2070(P) device will turn it into
the “Join State”.
3. “Ungroup State”, press the Push Button for more than 10 seconds, and the
2070(P) will ungroup from its current powerline network group
Scenario 1: 2070(P) Device A wants to form a network group with 2070(P) Device
B.
You can allocate which ever device (A or B) to become the “Broadcast State” and the
“Join State”.
Example:
1. Hold down the Push Button of 2070(P) Device A for 1~3 seconds to turn it into
the “Broadcast State”.
2. Hold down the Push button of 2070(P) Device B for 1~3 seconds to turn it into
the “Join State”.
3. Wait for the Sync LED of both Device A and B to light up and you will have
both devices being in the same network group.
Scenario 2: 2070(P) Device A wants to join an existing network group “BC”.
Device A wants to join a network group “BC” currently consisting of device B and
device C. Any devices within the “BC” group can become the “Broadcast State” and
device A will be the “Join State”.
Example:
1. Hold down the Push Button of 2070(P) Device B or C (of the “BC” group) for
1~3 seconds to turn it into the “Broadcast State”.
2. Hold down the Push button of 2070(P) Device A for 1~3 seconds to turn it into
the “Join State”.
3. Wait for the Sync LED of both Device A and (B or C) to light up and you will