Filter
Top Products
have device A joining the network group “BC”.
Scenario 3: 2070(P) Device A of network group “AD” wants to join an existing
network group “BC”.
For a device which already belongs to an existing group, if it wants to join another
group that device must go into the “Ungroup State” and ungroup itself first.
Example:
1. Hold down the Push Button of 2070(P) Device A for 10 or more seconds to turn
it into the “Ungroup State”. Once it is in the “Ungroup State” it breaks away from the
“AD” network group and becomes an individual device.
2. Hold down the Push Button of 2070(P) Device B or C (of the “BC” group) for
1~3 seconds to turn it into the “Broadcast State”.
3. Hold down the Push button of 2070(P) Device A for 1~3 seconds to turn it into
the “Join State”.
4. Wait for the Sync LED of both Device A and (B or C) to light up and you will
have device A joining the network group “BC”.