Filter
Top Products
29
The Network type (Public or Private) is also displayed based on the network status of the local
device. The scan status option is displayed on the top right corner above the Remote devices
panel showing whether the Autoscan function is turned ON or OFF.
The following information is displayed for all devices that appear in the lower panel:
Device Name:
Show the default device name. User can change the name by either clicking on the rename button
or by clicking on the name and editing in-place. An icon is usually shown with the device name.
Password (*required when one needs to change the Private Network Name of the devices)
This column is left blank by default. The password will be displayed only after it has been entered.
For detail information on password setup, please refer to section on Password Setup Instruction.
Each device comes with a unique password and it can be found at the back of the device itself.
Rate (Mbps):
Display the data transmission rate of each device.
MAC Address:
Show the Remote device MAC address.
Quality:
Display the overall quality of the data transmission rate. When the transmission rate is good, the
number of line appear will increase.