Filter
Top Products
myGuard 7500GL 802.11g Security ADSL Router
Chapter 4:Configuration
ADSL
Connect Mode: The default is Multimode; it will detect the ADSL line code, G.dmt, G.lite,
and T1.413 automatically. But in some area, it cannot detect the ADSL line code well. At
this time, please adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please
try the other values such as ALCTL, ADI, etc.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking
effect with setting of Connect Mode.
Coding Gain: Configure the ADSL coding gain from 0 dB to 7dB, or automatic.
Tx Attenuation: Setting ADSL transmission gain, the value is between 0~12.
DSP FirmwareVersion: Current ADSL line code firmware version.
Connected: Display current ADSL line sync status.
Operational Mode: Display current ADSL mode standard (Operational Mode) your Router
is using when ADSL line has sync.
Annex Type: ADSL Annex A, which works over a standard telephone line. Annex B,
which works over an ISDN line.
Upstream: Display current upstream rate of your ADSL line.
Downstream: Display current downstream rate of your ADSL line.
48