Filter
Top Products
DPD detects non-responding remote gateways) the VPN Client immediately starts opening a
new tunnel with the redundant gateway.
z The exact same behaviour will apply to the redundant gateway. This means that the VPN
Client will try to open primary and redundant gateway until the user exits software or click on
'Save & Apply'.
IKE port: Negotiation port for IKE. Default value is 500.
Local ID: Local ID is the identity the BiGuard VPN client is sending during Phase 1 to VPN
gateway. This identity can be: an IP address (type = IP address);
an domaine name (type = DNS);
an email address (type = Email)(biguardsupport@billion.com in our
example)
a string (type = KEY ID);
a certificate issuer (type=DER ASN1 DN) (About X509 certificates,
please see Appendix A) If this identity is not set, VPN client's IP
address is used.
Remote ID: Remote ID is the identity the BiGuard VPN client is expecting to receive during
Phase 1 from the VPN router. This identity can be: an IP address (type = IP address);
an domaine name (type = DNS);
an email address (type = Email);
a string (type = KEY ID);
a certificate issuer (type=DER ASN1 DN)
(About X509 certificates, please see
Appendix A) If this identity is not set, VPN
gateway's IP address is used.
X-Auth(Please see the Appendix A): Define the login and password of an X-Auth IPSec
negotiation. If "X-Auth popup" is selected, a popup window asking for a login and a password will
appear each time an authentication is required to open a tunnel with the remote gateway. The
end user has 20 seconds to enter its login and password before X-Auth authentication fails.
If X-Auth authentication fails then the tunnel establishment will fail too.