Billion Electric Company BIPAC-741 GE V2.0 Network Router User Manual


 
Chapter 3 Configuration
20
When you click the UPnP Portmap, it displays the Virtual Servers (or Port Mappings) that
created by UPnP protocol implemented in Windows.
3.6.2 Quick Start
If you use this device to access the Internet through the ISP, this web page is enough for you to
configure this router and access the Internet without a problem. Please check Chapter 3.5
(Information from the ISP), then enter the proper values into this web page, click the Apply
button and then Save Config to FLASH in the left panel. After the router reboot, you may check
the Status web page to check whether the router is connected to the ISP or not. In most cases,
you can access the Internet immediately. If not, please refer to the sections below for more
information.
3.6.3 Configuration
When you click this item, you get following sub-items to configure the ADSL router.
LAN, WAN, System, Firewall, VPN, Virtual Server and Advanced
These functions are described below in the following sections.
3.6.3.1 LAN
There are three items under the LAN section: Ethernet, Port Setting and DHCP Server. When
you click Ethernet, you get the following figure.