Filter
Top Products
28
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other access
points. It is easy to install simply by dening the peer’s MAC address of the connected AP. WDS
takes advantage of the cost saving and flexibility which no extra wireless client device is required to
bridge between two access points and extending an existing wired or wireless infrastructure network
to create a larger network.
WDS Mode: Default setting is Disable. You can enable the WDS functionality: Lazy Mode, Bridge
Mode and Repeater Mode.
Lazy Mode
● Lazy Mode: Select "Lazy Mode" from the WDS Mode drop-down menu. In this case, the device
can be functioned as AP and Bridge. The AP MAC Address of WDS peers can be auto-detected.
Please note that you are not allowed to set each AP to Lazy mode. It indicates that there is at
least one AP can not be set in Lazy mode and lled the AP MAC address list.
● Wireless Security: This led will display the encryption type in which you will set in WEP Keys
elds (Please resfer to Wireless Security/Encryption Settings section after setting up the WDS
Mode).