Filter
Top Products
4.3.5 AP Client
The AP Client provides the new function of wireless client for AP. It not only enables one AP to
connect to another one within its wireless coverage but keeps its original AP function at the same
time. The use of AP client is more convenient than that of WDS for AP connections. Just choose
the specied AP which you want to connect to in the AP list, two APs can be connected.
Wireless AP List
In the AP list,you can see the channel, SSID, MAC Address, Security, Signal and Wireless Mode
of the searched working APs in the neighborhood. Click the “AP Selection” radio button to select
the specied AP you want to connect.If the AP selected have security, you need to provide the
same security key to build safety connection.It should be noted that the channel will be changed
as the same as the AP selected after pressing Apply button to enable AP Client Service.
AP Client Service
● Click Eanble button If you want to activate the AP Client Service.The default setting is disable.
● AP Selected: This eld displays the AP you select in the “AP Selection” radio button. It shows the
Channel, SSID, MAC Address, Security and Wireless Mode. You should key in the encryption key
if required. Finally, click “Apply” to conrm the above setting
36