Filter
Top Products
21
Checking LAN Connection
Testing Ethernet LAN connection
This test passes if the Ethernet LAN interface is working properly.
Checking ADSL Connection
Testing ADSL Synchronization
This test checks your DSL modem to see if it can successfully negotiate and establish a
DSL connection with your service provider's central office equipments. The test returns
PASS if a DSL connection is established.
If this test returns FAIL, please try the test again a few minutes after this test is
completed. Since your DSL modem need a couple of seconds to a few minutes to
establish the DSL connection depending on your phone line quality. If this test returns
FAIL, make sure your phone line is connected to your DSL modem securely, and also
check with your service provider to see if your service is activated.
If this test returns FAIL, all other tests will be skipped.
Checking Circuit 0 for Network Connection
Test ATM OAM Segment Loop Back
This test sends ATM OAM F5 Segment loop back request cells to the central office
equipments through your DSL connection. This test will pass if response cell is received.
Since your service provider might not support this test, your DSL modem could still work
even if this test fails.