Filter
Top Products
Rev. 1.14
- 15 -
SRP-770II
5. Fine Tuning
5-1 Printer Settings with Dip switches
The dip switches are located on the bottom of the printer.
The dip switches are used to set the printer to perform various functions.
Follow these steps when changing dip switch settings:
1) Turn the printer power switch off.
2) Remove the screw on the bottom of the printer and open the bracket.
3) Flip the dip switches using tweezers or another narrow-ended tool.
Switches are off when up and on when down following the figure.
4) New settings take effect when the printer is turned back on.