Filter
Top Products
Rev. 1.14
- 19 -
SRP-770II
5-5 The Peel-Off
This function is used to automatically separate labels from the liner.
- The peeler is for Label Paper only.
- When the peeler switch is on, labels are not printed if previous printed labels have
been removed from the peeler.
- When the peeler function is not required, turn the peeler switch off. Keeping the
switch on may result in the printer not working correctly.
- When the peeler switch has been changed, the printer should be turned off and
back on.
1) Open the peel-off cover and turn on the peeler switch. (Check if the peeler LED is on.)
P
E
E
L
E
R
OF
F
O
N
2) Remove the paper and insert the paper through the slot.
Remove
LED