Filter
Top Products
BLACK BOX
10Mb Economy BNC Media Converters Installation & User Guide
29
1. Using standard 10BASE-T media, insert either end of the cable with an RJ-45
plug into the RJ-45 connector of the Black Box Media Converter.
2. Connect the other end of the cable to the corresponding device.
Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the units are powered and proper connections established. If the LINK
LED is not illuminated, change the setting of the up-link switch (See Section 4.6 for up-
link switch information.) If this does not help, ensure that the cable is connected
properly at both ends and is not defective.