Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 29
LES301A user manual
Chapter 4: Software Setup
2. Type in the old password in the “Old Password” field, type in the new password in the “New Password” and the “Verified
Password” fields, and then click on “Save Configuration” to update the password.
NOTE: Press the default key to reset password to the default value.
3. COM type selection: Click on “COM1” Link and the following screen appears (see Figure 4-21). Select the COM type and click
on “Save” to update the COM port typesetting.
DOES THIS SCREEN EXIST FOR LES301A??
Figure 4-21. COM type selection.
4.3.3 Network Setup
Click on the “Networking” link and the following screen appears. Fill in the IP information under the TCP/IP field. Or, you can
configure the unit by clicking on DHCP to obtain auto IP address, gateway, and subnet mask information.
Enable SNMP by checking “Enable,” then fill in network identification information under SNMP field and click on the “Save
Configuration” button to save the changes.
NOTE: The setting will not become effective until you restart the LES301A.