Filter
Top Products
Page 18
724-746-5500 | blackbox.com
Chapter 5: Operation (AVSW-VGA8X1A)
5. Operation (AVSW-VGA8X1A)
5.1 Front-Panel Indicators and Push Buttons
To select Source Ports 1–4, simply press the corresponding front-panel button
(K1–K4) on the switch.
To select Source Port 5, press and hold the “S” button on the switch, then press
K1 to select Port 5.
To select Source Port 6, press and hold the “S” button on the switch, then press
K2 to select Port 6.
To select Source Port 7, press and hold the “S” button on the switch, then press
K3 to select Port 7.
To select Source Port 8, press and hold the “S” button on the switch, then press
K4 to select Port 8.
NOTE: Each port selection step should be individual.
Table 5-1. Push button controls.
Start with this key
sequence…
Then press the
“K1” key to
select…
Or press the
“K2” key to
select…
Or press the
“K3” key to
select…
Or press the “K4”
key to select…
None Source 1 Source 2 Source 3 Source 4
Press hold the “S”
key for more than 3
seconds.
Source 5 Source 6 Source 7 Source 8
Table 5-2. Dual-color (green and red) LED next to S button.
LED Mode LED Color LED State
Next to “S” button Status
Green
Turns green when
the video switch is
powered on.
Yellow
Turns yellow
when the port
is selected.