Filter
Top Products
Page 19
724-746-5500 | blackbox.com
Chapter 5: Operation (AVSW-VGA8X1A)
Table 5-3. Single-color (yellow) LEDs next to buttons 1–8.
LED Number Color Description
1 Yellow The video port on Source 1 is selected.
2 Yellow The video port on Source 2 is selected.
3 Yellow The video port on Source 3 is selected.
4 Yellow The video port on Source 4 is selected.
5 Yellow The video port on Source 5 is selected.
6 Yellow The video port on Source 6 is selected.
7 Yellow The video port on Source 7 is selected.
8 Yellow The video port on Source 8 is selected.
5.2 EDID Copy
STEP 1: Power on the unit.
STEP 2: Connect the EDID compliant monitor to the switch and power on the
monitor.
STEP 3: Press the “EDID COPY” button for 3–5 seconds, and release the button
RIGHT AFTER the Power LED flashes green.
STEP 4: The Power LED flashes yellow and green alternately then lights green
indicating the copy is successful.
NOTE: If the Power LED flashes yellow, the reason could be:
1. The monitor is not connected.
2. The monitor is not powered on.
3. The EDID data of the monitor is not applicable.
5.3 Remote Control
Using the included remote control, users can control the switch within a range of
15 feet (5 m). To select a source device with a remote control, press the
button number (1–8), to directly switch to the corresponding port.
NOTE: Remove the “battery protector” on the remote control before operation.
NOTE: On the remote control, Buttons 1–8 are activated.