Black Box AC504A-WP Network Hardware User Manual


 
Mini-Cat5 Extender Wallplate Transmitter
5
Figure 2 – AC504A-WP Front
1.2 Features
Extends high resolution video with no loss to 500 feet
Differential signaling eliminates ground loops and noise
Handles resolutions up to 1600x1200 at any refresh rate
Slim single gang wall plate design
Reliable and economical
Only one end requires power in most applications. Power supply
can be connected at the sending or the receiving end, whichever is
convenient.
Drive standard CAT5 cables to 500 feet (for VGA and Component
Video) or to 1200 feet (for Composite Video + Audio)
2. Installation
2.1 Setup Connections
1. Connect the VIDEO INPUT to the computer's video port using a
male-male VGA cable (not included).
2. Using Category 5 cables connect the RJ45 port of the Transmitter
located on rear of the unit to the Model AC602A Receiver (not
included).
3. Connect the Remote displays to the VGA output port of the
AC602 Receiver.