Filter
Top Products
ServSwitch Agility and Agility Dual
724-746-5500 | blackbox.com
Page 28
3.2.10 Remote AUX Port
The AUX port is an RS232 serial port that allows extension of RS232 signals up to a baud rate of 115200. The port has soft-
ware flow control, but no hardware flow control.
1 Ensure that power is removed from the ServSwitch Agility unit.
2 Connect a suitable serial ‘null-modem’ cable (see Appendix D for pin-out) between the AUX port on the right hand side of the
ServSwitch Agility rear panel and your remote serial device. See Figure 3-22.
AUX
/
LINE OUT
Serial (null-modem) link
from your computer
Figure 3-22. Connecting the serial link cable to local transmitter unit socket.