Filter
Top Products
724-746-5500 | blackbox.com
Page 15
Chapter 4: Console Configuration
CO/RT:
CO/RT has 2 options: STU-C and STU-R. To establish a successful connection for two G.SHDSL Two-Wire Ethernet Network
Extenders, set one unit to STU-C (CO Site) and the other unit to STU-R (Remote Site).
2P/1P:
2P/1P has 2 options: 1 Pair and 2 Pairs. The LR0201A-KIT only supports a 1-pair SHDSL application. To establish a successful con-
nection for LR0201A-KIT, set the two units to the same selection.
4.2.2 DSL Speed Screen
From the DSL Speed screen, users can configure the DSL transmission rate.
Options for 1-pair setting in the DSL Mode menu are:
64 kbps, 128 kbps, 192 kbps, 256 kbps, 384 kbps, 512 kbps, 768 kbps, 1152 kbps, 1536 kbps, 1544 kbps, 2048 kbps,
2304 kbps, 3072 kbps, 4608 kbps, 5696 kbps, and Adaptive speed.
Set both LR0201A-KIT units to the same speed to establish a successful connection for 64 kbps, 128 kbps, 3072 kbps, 4608 kbps,
5696 kbps, and Adaptive speed.
For the rate speed options between 192 kbps and 2304 kbps, the remote (slave) site will follow the CO (master) site’s speed,
regardless of the speed selected for the remote site unit.
When setting for adaptive rate, two or more activation cycles are necessary. The system will automatically adapt to maximum
speed according to the loop distances. The maximum speed is 5.696 Mbps for 1-pair mode.
DSL Speed
DSL Speed Setting = Adaptive
[ARROW UP] [ARROW DOWN] option
[ENTER] select [ESC] quit
Figure 4-6. DSL Speed screen.