Filter
Top Products
11
Chapter 2 Scan/Email Operations
6
Insert the SD Memory Card.
① Push the Slot Cover to open it.
② Insert the SD Memory Card as illustrated.
(Label side up).
7
Select “SD Card”.
zOnly one storage device can be selected at
a time. When the "SD Card" is selected as a
storage device, the scanned image cannot
be saved to the PCMCIA/PC Card or Hard
Disk Drive at the same time.
8
Press the Start key.
Scanned image is saved in the following
directory of the SD Memory Card.
zDirectory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
zWhen scanning from the Platen Glass, place
the next original, and then follow the
instructions described on the touch panel
display.
9
Push the SD Memory Card, and then
remove it.
zDo not remove the SD Memory Card while
the Access Indicator is flashing.
10
Close the Slot Cover.
zWhen canceling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.