Filter
Top Products
8 EncrypTight Manager Installation Guide
EncrypTight-Manager-3.3
• Available in 32 and 64 bit architectures
• Expects to be run in an environment where the VM has at least 2GB of RAM and 40GB of disk
• This virtual machine is setup so that when it first boots it will initialize the operating system for use
by EncrypTight Manager. It will not be fully configured until there is some user interaction to finish
the installation options of EncrypTight Manager.
Installation Options
• Single server
• 1 VM
• High Availability cluster
• Minimum 2 VMs on different hardware
• Disaster recovery server
• 1 VM
• Communication over ports must be possible to the Main site. Port 22 must be available on the DR
server and port 8764 must be available on each server in the main cluster.
NOTE
These ports are made available by default.
Supported Virtual Machines for EncrypTight-Manager-3.3
• VMware
Hardware Options
• Hardware is provided, (either Dell r310s or r200s, with a minimum of 4GB of RAM).
• Hardware versions are exactly the same as the Virtual Machine offerings, they are just installed
directly to hardware.
Installation Options
• Single server - 1 server
• High Availability cluster - Minimum 2 servers
• Disaster recovery server - 1 server, communication over ports must be possible to the Main site: 22
and 8764