Filter
Top Products
BLACK BOX
®
Media Converter Switches Installation and User Guide
56
10 or 100 Mbps speed and F/H duplex mode, and the device at the other end of the cable
should similarly advertise / respond and both sides will agree to the speed and mode being
used. Depending upon the device connected, this will result in agreement to operate at
either 10 Mbps or 100Mbps speed, full- or half-duplex mode.
4.3 (F- H) Switch, Full-Duplex or Half-Duplex options for Fiber port # 1
The (F–H) manual switch has been provided for fiber port #1, for fixing that port
at Full or Half Duplex as per the requirements. The (F-H) manual switch is being located
underneath the fiber port. The Fiber port with 10Mb is being set at Half-Duplex, and the
100Mb being set at Full-Duplex as default from the factory. The port can be set at the
required mode, by sliding the manual switch position to “F” or “H”.
4.4 Dual LEDs, Front-panel and side-panel (LBH100A and LBH100A Series)
LED
Description
PWR Illuminates GREEN to indicate power applied.