Filter
Top Products
Note: You can attach two external sensors onto the terminals on EMDs that are connected to LES1108A,
LES1116A, LES1132 and LES1148A console servers. LES1508A, LES1408A, LES1416A,
LES1432A, LES1448A, LES1308A, LES1316A, LES1332A, LES1348A,
LES1208A-R2, LES1216A-
R2, LES1232 and LES1248A-R2
console servers only support attaching a single sensor to each
EMD.
You can only use the EMD with a Black Box console server; you cannot connect it to standard
RS-232 serial ports on other appliances.
Select Environmental as the Device Type in the Serial & Network: Serial Port menu for the port
to which the EMD will be attached. No particular Common Settings are required.
Click Apply.
Select the Serial & Network: Environmental menu. This will display all the EMD connections
that have already been configured.
Click Add.
Enter a Name and optionally a Description for the EMD and select the pre-configured serial
port that the EMD will be Connected Via.
You may optionally calibrate the EMD with a Temperature Offset (+ or - °C) or Humidity Offset
(+ or percent).
Provide Labels for each of the two alarms (if used).
_____________________________________________________________________
724-746-5500 | blackbox.com Page 164