Filter
Top Products
PuTTY can be downloaded at http://www.tucows.com/preview/195286.html
SSH We recommend that you use SSH as the protocol where the User or Administrator connects
to the console server (or connects through the console server to the attached serial consoles)
over the Internet or any other public network. This will provide authenticated SSH
communications between the SSH client program on the remote user’s computer and the
console server, so the user’s communication with the serial device attached to the console
server is secure.
For SSH access to the consoles on devices attached to the console server serial ports, you can
use SDT Connector. Configure SDT Connector with the console server as a gateway, then as a
host, and enable SSH service on Port (3000 + serial port #) i.e. 3001-3048. Chapter 6—Secure
Tunneling has more information on using SDT Connector for SSH access to devices that are
attached to the console server serial ports.
You can also use common communications packages, like PuTTY or SSHTerm to SSH connect
directly to port address IP Address _ Port (3000 + serial port #) i.e. 3001–3048.
SSH connections can be configured using the standard SSH port 22. Identify the the serial
port that’s accessed by appending a descriptor to the username. This syntax supports:
<username>:<portXX>
<username>:<port label>
<username>:<ttySX>
<username>:<serial>
_____________________________________________________________________
724-746-5500 | blackbox.com Page 51