Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 141
Chapter 3: Configuration
• Egress: Port Egress Rewriting can be one of these parameters:
- Disable: No Egress rewrite.
- Enable: Rewrite enable without remapped.
- Remap: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
3.14.7 DSCP-Based QoS
This section describes how to configure the DSCP-Based QoS mode for the basic DSCP-based QoS Ingress Classification settings
for all switches.
Web Interface
To configure the DSCP-Based QoS Ingress Classification parameters in the Web interface:
1. Click Configuration, QoS, DSCP-Based QoS.
2. Enable or disable the DSCP for Trust.
3. Scroll to select QoS Class and DPL parameters.
4. Click the Save button to save the setting.
5. To cancel the setting, click the Reset button to revert to previously saved values.
LGB1108A