Filter
Top Products
ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL
184
Subcommands and parameters
trace iface [in | out | hex | ppp | packet | up | > filename]
iface eth0, modem0-4, sync0
in Limit traces to packets received on the interface.
out Limit traces to packets sent by the interface.
hex Add an additional hex dump to the output.
ppp Include PPP packets in the trace.
packet Include all packet types in the trace.
up Displays the packets keeping the WAN link active.
> filename Sends trace data to the file filename.
2.24 tux
(TCP under IPX) Provides status of all TCP under IPX connections.
Syntax
tux status
Description
This command helps determine the amount of traffic passing through the connection, and shows
the last time data was sent or received. The figures compiled by the report are cumulative.
Subcommands and parameters
tux status
Example
The report issued by the tux command has the following columns:
From The IPX address sending the packets
Sent-Pkt Total number of packets sent
Rcvd-Pkt Total number of packets received
Last Rcvd Date last packets were received