Filter
Top Products
55
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
4.4 Installing the Wireless Bridge (LW004A or LW010A)
The Wireless Bridge (LW004A or LW010A) is a plug-
and-play installation. All you need to get up and
running is to connect the power supply to the Bridge
and to connect the Bridge directly to the Hub or to
any available outlet of the Ethernet LAN.
You can make sure the Wireless Bridge is fully
operational by checking the LED indicators as
described in Step 5 on page 62.
To complete the installation process, you will need
a 10BASE-T Ethernet cable with an RJ-45 connector
at each end.
Step 1: Check to make sure the package contains the
components you will need.
The package you received should contain the
following components:
• Wireless Bridge (LW004A or LW010A)
• 5-VDC power-supply transformer
• This User’s Manual