Filter
Top Products
83
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
To access the advanced setup functions with a local
monitor:
You can access the advanced setup functions using
an ASCII ANSI terminal or a PC capable of
emulating an ASCII ANSI terminal using the
following settings:
Baud rate 9600
Data bits 8
Stop bits 1
Parity None
Flow control None
Connector Available Com port
The following procedure uses the Windows
Terminal emulation program as an example.
1. Connect the RS-232 3-pin connector at one
end of the monitor cable to the MON port on
the back panel of the Hub.
2. Connect the other end of the cable to a serial
port of a PC (COM Port); see
Figures 5-1 and 5-2.
3. Open Windows.
4. Double-click on the Terminal icon in the
Windows Program Manager’s Accessories
group.