Filter
Top Products
89
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
5.1.2 S
YSTEM
C
ONFIGURATION
M
ENUS
You can access all the items needed to configure
your Wireless Ethernet Hub from the System
Configuration menu.
To access the System Configuration menu:
• From the Main menu, type 1. The System
Configuration menu appears.
Use the following procedures to make selections
from the System Configuration menus.
To make selections from the menus:
1. Select one of the items from the menu.
Type 1 to select the Station Status menu.
Type 2 to select the IP Addresses menu.
Type 3 to select the WLAN Parameters menu.
Type 4 to select the Station Control menu.
The selected sub-menu appears.
2. Press Esc at any stage to return to the
previous menu.
3. You can move through all the Advanced
Setup sub-menus using these procedures and
following the instructions on the screens.