Filter
Top Products
92
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
All addresses may be set using regular IP address
notation (four bytes separated by periods), together
with the subnet mask. To access a host belonging to
a different subnet, the Wireless Ethernet Hubs send
the traffic through the default IP gateway. The
gateway IP address should also be specified if such
access is required.
To set the Hub IP parameters:
1. From the System Configuration menu, type 2.
The IP menu appears.
2. From the IP menu, select the required item as
follows:
Type 1 to change IP address.
Type 2 to change IP net mask.
Type 3 to change IP address for default gateway.
Type 4 to view current IP addresses in memory.