Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 19
Chapter 4: Basic Settings
4. Basic Settings
4.1 Factory Default Settings
To return the extender to its factory-default settings, see Section 6.6.
Table 4-1. Wireless P-T-P Ethernet Extender Factory Default Settings.
Parameter Default Setting
Username admin
Password password
Wireless Device Name apXXXXXX (X represents the last 6 digits of the Ethernet MAC address)
Operating Mode AP
Data Rate Auto
LAN IP Address 192.168.1.1
LAN Subnet Mask 255.255.255.0
LAN Gateway 0.0.0.0
LAN Primary DNS Server 0.0.0.0
LAN Secondary DNS Server 0.0.0.0
Spanning Tree Enable
802.11 Mode 802.11b/g/n
Channel Number 6
SSID Wireless
Broadcast SSID Enable
HT Protect Disable
Data Rate Auto
Output Power Full
Channel Mode 20 MHz
WMM Enabled
RTS Threshold (byte) 2346
Fragmentation Length (byte) 2346
Beacon Interval 100
DTIM Interval 1
Space in Meters 0
Flow Control by AP Disable
Security Open System
Encryption None
Wireless Separation Disable
Access Control Disable
SNMP Enable/Disable Enable
SNMP Read Community Name Public
SNMP Write Community Name Private
SNMP IP Address 0.0.0.0