Filter
Top Products
Copyright 2006 Ringdale User Manual, 62-15820000 Page 14
1414
14 of
of of
of 49
4949
49
TC P/IP SETT INGS
1) Enter an unused IP Address from your network, or click on the DHCP/RARP
Enable.
NOTE: If you change to an address that is NOT in the same network range that
your PC is, you will still be able to see the FaxReceiver with the FaxConfig utility,
but you will not be able to change any parameters until you are on the same
subnet.
2) If you are not using DHCP or RARP, make certain that the Subnet Mask is
correct.
3) If you are not using DHCP or RARP, set the Default Gateway.
4) The Mail Server SMTP Address can be entered either as a URL (for example
smtp-server.austin.rr.com) or an IP Address. Using the URL is recommended
if you may be changing ISP’s, and have your own mail server that will retain
the same name.
5) DNS Server 1 and 2 are the Domain Name Servers provided by your ISP. It is
used to convert the Mail Server SMTP Address’s URL to an IP Address.