Filter
Top Products
PAPER MODE?
Is generally used only for test purposes. It may also be used on roll stock with no
black marks on the ticket.
Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
INC BPP CUT COUNT?
Enables the operator to move Boarding Pass tear position to the left (towards the ticket
exit area). Cut counts are increments of .005” for 200dpi. The count value is changed
by depressing CHOICES. 16 is factory default.
DEC BPP COUNT?
Enables the operator to move the Boarding Pass tear position to the right (towards the
ticket entrance area). Cut counts are decrements of .005” for 200dpi. The count value is
changed by depressing CHOICES. 16 is factory default.
INC BTP CUT COUNT?
Same as INC BPP CUT COUNT? but effects the Bag Tag.
DEC BTP CUT COUNT?
Same as DEC BPP CUT COUNT? but effects the Bag Tag.
PRINT MODE?
Defines the automatic ticket length calculation feature.
THERMAL
The printer will feed out and then retract a ticket during this measurement.
(factory default)
RIBBON
The printer will feed out one blank ticket.
This mode is used for label stock to prevent peeling.
PRINT INTENSITY? Controls the darkness of ticket print out.
Here are the following choices:
LIGHT
MED LIGHT
NORMAL (factory default)
MED DARK
SHORT HEAD LIFE
EXIT AND SAVE !
Will save any changes made to the above menu options.
If you wish to save the new value then press TEST, if not press MENU.
A4