Filter
Top Products
32 en | Configuration Using HyperTerminal ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
6.3.6 Service Menu
The System Menu contains settings for bridge operation.
– Restore Defaults: Resets all COM and Terminal settings to
factory defaults. This button does not reset the Network
settings.
– Reset Bridge: Reboots the bridge by cycling the power.
– Diagnostics: Select this option to perform the EEPROM
diagnostic test.
– Version Info: Displays the firmware release level for the
bridge.