Filter
Top Products
UML-19P-90 LCD Monitor Installing the Monitor | en 11
Bosch Security Systems, Inc. User’s Manual F01U099396 | 1.0 | 2008.11
4.2 Power
5 Installing the Monitor
This chapter outlines the procedures to install the UML-19P-90. A qualified service person
should install the monitor and adhere to all local codes.
5.1 Ventilation
To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not
covered.
5.2 Mounting the Monitor
The UML-19P-90 is designed for use on a desktop or mounted to a wall or rack.
5.2.1 Desktop Installation
The UML-19P-90 is delivered with a 3-pole US-style power cord and a 2-pole Euro-style power
cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; use the Euro-style
power cord where 230 VAC, 50 Hz power is available. The monitor automatically adjusts to
either power input voltage.
5.2.2 Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:
1. Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel. NOTE: Save screws for future use.
Figure 5.1 Removing the Base
Model No. Rated Voltage Voltage Range Power at Rated Voltage
UML-19P-90 120/230 VAC,
50/60 Hz
100-240 VAC 40 W (max)